Back to Blog
How-to Guides 2026-11-16 Dripface Stour 0 views

Enamel Pin Display Ideas: How to Show Off Your Lapel Pins

Enamel Pin Display Ideas: How to Show Off Your Lapel Pins

Practical enamel pin display ideas for boards, fabric, and storage, plus how to plan around pin size and rubber backings so your lapel pins stay secure and visible.

Start with the pins you actually own

Before you choose a display board or fabric, measure the pins you want to show. Two pins from the same collection can need different spacing: the I LIKE TO WATCH pin is 1.25in across, while the SEER v.2 enamel lapel pin is 1.5in. That quarter-inch difference affects how tightly you can group them without crowding the artwork.

Both pins use a rubber backer, so your display plan should include a way to reach the back of each pin. A display that looks good but makes backings hard to remove will turn pin organization into a chore.

Pin details that shape your display

  • I LIKE TO WATCH pin: I LIKE TO WATCH is a 1.25in enamel lapel pin with a rubber backer, based on original 2018 artwork by Dripface. Its compact size suits tighter groupings, but the rubber backer needs enough clearance behind the fabric for your fingers.
    I LIKE TO WATCH pin
    I LIKE TO WATCH pin
  • SEER v.2 - enamel lapel pin: SEER v.2 is a 1.5in metal enamel lapel pin with a rubber pin backing, packaged on a 2.5in x 2.5in card. The 2.5in card gives you a ready-made spacing reference: leave at least that much room if you want to keep the pin on its card or store it flat.
    SEER v.2 - enamel lapel pin
    SEER v.2 - enamel lapel pin

How to build a lapel pin display board

  1. Choose a board with enough depth: A firm backing such as cork or canvas-covered board holds pins upright. Check that the pin post can pass through and that the rubber backer sits flat against the back.
  2. Map your layout before you poke holes: Lay the pins face up on the board and arrange them by size. Give the 1.5in SEER v.2 more breathing room than the 1.25in I LIKE TO WATCH pin.
  3. Leave a finger gap behind each pin: Rubber backers need to be pulled straight off. If two pins are too close, you will struggle to grip one backer without disturbing its neighbor.
  4. Secure the board, not the pins: Mount the board so it will not flex when you remove a pin. A flexing board can loosen backings and make pins drop.

Display ideas beyond a traditional board

  • Canvas or fabric-covered panel: A fabric surface grips rubber backers and hides pinholes. Stretch the fabric tight so pins sit straight.
  • Shadow box with a pin cushion insert: A shallow box keeps dust off and lets you lean the display on a shelf. Leave the lid off if you need frequent access to backings.
  • Pin flag or banner: A fabric banner works for a rotating display. Keep the banner flat against a wall so the pins do not swing.
  • Card-backed storage: The SEER v.2 pin arrives on a 2.5in x 2.5in card. Keeping pins on their cards in a box is a simple pin collection storage method that protects the enamel from scratches.

Pin backing care on a display

Rubber backers are the most common point of failure in a pin collection. When you remove a pin from a display, pull the backer straight off rather than twisting it. Twisting stretches the rubber and reduces grip over time.

If a backer feels loose, move that pin to a less exposed spot on your display or store it flat. The supplied product information does not include replacement backer specifications, so check the backing condition before you mount a pin in a high-traffic area.

Enamel pin organization for a growing collection

  • Sort by size first: Group 1.25in pins like I LIKE TO WATCH separately from 1.5in pins like SEER v.2 so your layout stays balanced.
  • Keep a staging tray: A shallow tray holds pins you are not currently displaying. Line it with felt to reduce enamel scratches.
  • Record what you own: A simple list with pin name and size helps you avoid buying duplicates and makes it easier to rotate displays.

Related Articles

Customer Service
Home
Products
Cart
Profile